How do I fix the white screen on my iPod classic?

How do I fix the white screen on my iPod classic?

All replies

  1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
  2. Press and hold the Play/Pause and Menu buttons simultaneously until the Apple/iPod logo appears, about 6 to 8 seconds. You may need to repeat this step.

Is there a white screen of death?

The ‘White Screen of Death’ (WSoD) is a horrible error for a website owner to encounter – one of the worst, in fact – especially if you don’t have the knowledge to fix it. With only a blank screen staring back at you, there’s absolutely no indication of what’s happened, and no way of knowing what to do next.

How do you reset an iPod nano 2nd generation?

iPod Nanos can be hard reset by booting while holding the menu and play/pause buttons. This should result in a quick dark screen followed by the standard Apple boot graphic.

Why is my iPod touch stuck on the Apple logo?

Press and hold both the Home button and the top button until you see the Apple logo. If your iPod touch doesn’t turn on, follow these steps to check your hardware and charge your device. You might need to charge for up to an hour. If your iPod touch still doesn’t turn on, contact Apple Support.

How to fix iPod Touch white screen?

[Solution] iPod Touch White Screen Fix 1 Plug in Your Device to A Power Source. 2 Force Restart Your Device While It’s Plugged in. 3 Hold Down Home + Volume Up + Power. 4 Fix iPod touch White Screen without Data Loss. 5 Restore Your Device Using iTunes. See More….

Why does my iPod Nano have a white screen?

This article says that, if your iPod nano’s display shows a white screen, to put the iPod into disk mode and restore using iTunes: While the device is in disk mode, sync it to iTunes and try to restore. Even though that article is for the 6th gen, the steps should still apply to yours.

What is white screen of death in iOS?

Unlimited facts have proved that white screen of death is often happened when you’re performing an updating or jailbreaking of iOS system on your device. The process may fail and your device stuck on white screen.

How to fix iPod Touch won’t turn on?

Step 1. Identify the home button which circular button at the bottom face of your iPod Step 2. Locate the sleep/wake is on the top left side. Step 3. Now, tap on the home button and Sleep/Wake button simultaneously for more than ten seconds. Step 4. When the Apple logo appears your iPod should reboot immediately. You can use your device.