How wide is a Category 3 quick hitch?

How wide is a Category 3 quick hitch?

Three-point hitch specifications

Category Hitch pin size
1 19 mm (3/4″) 22.4 mm (7/8″)
2 25.5 mm (1″) 28.7 mm (1 1/8″)
3 31.75 mm (1 1/4″) 37.4 mm (1 7/16″)
4 45mm (1 3/4″) 51 mm (2″)

What size is Cat 3?

What are the 3-point hitch categories?

Category Tractor Power Lift arm pin diameter
1 20-45 HP 7⁄8 in (22 mm)
2 40-100 HP 1 1⁄8 in (29 mm)
3 80-225 HP 1 7⁄16 in (37 mm)
4 More than 180 HP 2 in (51 mm)

What is the standard width of a 3 point hitch?

Category 0 3-point hitches are almost exclusively found on garden tractors and lawn tractors. They are considered light-duty and accept implements that are 20″ wide. The dimension from the lower pins to the top link pin is typically 12″.

How wide is a quick hitch?

The overall dimensions measure 30-1/4 inch width x 23 inch height x 8-1/4 inches front to back. The lift arm spacing measures 27-1/4 inches with a ball bracket lift of 26 inches.

How wide is a cat 2 quick hitch?

LEE BOSS Quick Hitch Dimensions

Lower Hitch Point Span (D) Width Of Hook (F)
Cat 1 695.96mm
Cat 2 32.62 in. 50.80mm
828.55mm
Cat 3N 32.62 in. 50.80mm

What is the difference between a Cat 1 and Cat 2 3 point hitch?

Category 0 Hitch For tractors with up to 20 horsepower. Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.

How wide is a Category 2 quick hitch?

Category 2 Category 4N
Lower link pin diameter 27.94 mm (1.10 in.) 50.8 mm (2.00 in.)
Lower link hole diameter 28.70 mm (1.13 in.) 51.05 mm (2.01 in.)
Lower hitch point Span (1) 825 mm (32.48 in.) 920 mm (36.22 in.)
Width of ball (2) 44.96 mm (1.77 in.) 57.4 mm (2.26 in.)

What are the dimensions of a Category 2 quick hitch?

The overall dimensions measure, 37-1/4 inches width x 19-1/2 inches height x 4 inches front to back. The hooks measure 32-1/4 inches from center to center. 2 Lift pins: 1-1/8 in. 2 Top link pins: 1 in.

What is the difference between Cat 1 and Cat 2?

Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.

What is a Category 4 drawbar?

The Category 4 drawbar features a 51 mm (2 in.) drawbar pin and offers up to 4900 kg (11,000 lbs) vertical load carrying capacity with drawbar reinforcement kit. Improved drawbar pin attachment prevents pin from turning inside the drawbar, preventing excessive drawbar wear.

What size is a Category 1 3 point hitch?

Category 1 3-point hitches fit with sub-compact and compact tractors with horsepower from 20HP to 45HP. This hitch has a top link pin diameter of ¾ inches and a lift arm diameter of 7/8 inches. Two lift arms are placed 26 inches apart.

What are the ASAE 3-pt hitch standards?

These Quick Hitches are built to work with implements built to ASAE 3-pt hitch standards (Category I, Category II or Category III). The QH-101 (Category I) provides a special floating top link bracket that allows the operator to use this Quick Hitch with implements that will not accept a top link hook, due to the pin location being too low or high.

What is a Category 4 hitch on a tractor?

Category 4 hitches are found on tractors of 180 hp or greater and have top link pins that measure 1-3/4″ and lift arm pins of 2″. The spacing of the lift arms is about 46″. There is also a category 4N hitch which has the same pin diameters but the lift spacing is narrower at 38″.

What size Hitch do I need for my Tractor?

The connecting hole size depends on the category of the 3-point hitch. For example, a Category 3 hitch is used with a tractor of 80-225HP. This hitch has a top link pin diameter of 1¼ inches and a lift arm pin diameter of 1-7/16 inches In general, 3-point hitches are grouped into 5 size categories from Category 0 to Category 4.