How do you get perfect grout lines?

How do you get perfect grout lines?

10 steps for grouting narrow grout lines

1. Mix the grout. Pour unsanded tile grout into a bucket and mix it with water, carefully following the instructions on the package.
2. Let the grout rest.
3. Scoop.
4. Spread.
5. Force the grout into the grout lines.
6. Scrape off excess.
7. Apply more grout.
8. Let the grout rest.

Do you put grout between wall and tile?

Grout fills the joints between tiles. The sole purpose of grout is to fill the spaces between tiles after the tiles have been glued in place on a floor or on a wall. Grout keeps the tiles from shifting, and also protects the edges of tile from chipping.

What is the thinnest grout line possible?

1/16″
Smallest size grout lines should not be less than 1/16″. This is an acceptable space that can be properly grouted. When the space between tiles is so little like 1/32″ which is often referred to as “credit card lines” or “penny lines”, it’s not possible to fill that space all the way through the bottom of the tile.

Should grout be lower than tile?

The shaping of the grout is important for aesthetic reasons; you always want grout to fall just a bit below the surface of the tile because the grout is much softer than the tile and needs that added little bit of protection from traffic. Otherwise, it will wear away before its time.

What happens if you put grout on top of grout?

If you try adding new grout over your old grout, the new mixture will not properly adhere to the existing grout or tile edges, leaving your shower open to water damage.

Do you grout between tile and wall?

Do you let grout dry before wiping?

Don’t scrub too hard: Scrubbing, or using too much water, right after application is one of the biggest mistakes DIY-ers make. Before wiping off any excess product, let the grout harden and then test it with your finger.