How do I reset my Cisco IP Phone 7900?

How do I reset my Cisco IP Phone 7900?

Unplug the power cable and/or the switch cable if using PoE. Plug the device back in, pressing and holding the “#” key before the Speaker button flashes on and off. Continue to hold the # button until each line button flashes on and off in sequence (amber). Next release the # and in order hit 123456789*0#

How do you reset a Cisco IP phone?

Factory Reset

  1. Unplug the power cable from the phone and then plug it back in. The phone begins its power up cycle.
  2. While the phone is powering up, and before the Speaker button flashes on and off. Press and hold #.
  3. Release # and press 123456789*0#. The phone will reboot and will indicate he is upgrading his firmware.

How do I reset my Cisco phone PIN?

From Cisco Webex Settings, go to My Profile, click More , and choose Reset Voicemail PIN. You can reset your voicemail PIN on your phone.

How do I reset my Cisco 8811?

Unable to reset a Cisco 8811 phone to factory default

  1. Remove power from the phone in one of these ways: · Unplug the power adapter. · Unplug the LAN cable.
  2. Wait 5 seconds.
  3. Press and hold # and plug the phone back in.
  4. When the Headset and Speaker buttons are lit, release # and enter the following key sequence:

How do I reset my password on my Cisco IP phone 7941?

How to Reset the Password on a 7941 Series Cisco IP Phone

  1. Hold down the “#” button.
  2. Release the “#” only when the Headset, Mute and Speaker buttons have all flashed.
  3. Wait while the phone resets.
  4. Enter the factory default password.
  5. Enter a new password when prompted.

How do I reset my Cisco phone remotely?

Simply add /admin/reboot to the phone’s IP in web URL (e.g. and providing there are no active calls, phone will reboot.

What is the default PIN for Cisco IP phone?

Access Phone Configuration Settings You can change the PIN of the IVR from the Common Phone Profile page. When there is no User ID or PIN associated with a phone, the phone uses a default PIN of 24726.

How to reset Cisco IP phone to the factory default?

Objective. Resetting the Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series to default setting lets you revert all the settings of the phone to factory default settings.

  • Applicable Devices
  • Factory Reset the IP Phone from the Phone Menu. Press the Applications button on the front of the phone.
  • Reset the IP Phone Using the Keypad.
  • How do you reset a Cisco router?

    With the router powered off,connect the power cord to your router,and plug the power cord into your power source.

  • Find the Reset button on the router.
  • Press and hold the Reset button while you power on the router.
  • Release the Reset button after 10 seconds.
  • Wait 5 to 10 minutes for the router to finish booting.
  • Power off your router.
  • How do I Reset my Cisco phone password?

    Press the Settings button on the IP phone.

  • Choose Device administration using the navigation button.
  • Choose Set password using the button.
  • Enter the password that you want to use in the New password field.
  • Re-enter the password in the Reenter new password field.
  • Press the Save softkey to confirm.