How do I connect to WiFi using TP-Link?

How do I connect to WiFi using TP-Link?

Power on your router and computer first and then modem.

1. Log into the router’s web-based management page.
2. Configure WAN Connection Type.
3. Enter your PPPoE username and password which are provided by your ISP.
4. Click Save to save your settings, then the router will connect to Internet after a while.

How do I change my WiFi settings TP-Link?

How do I configure the basic wireless settings for my TP-Link 11N routers (new logo)?

1. Log into the router’s web management page:
2. Select Wireless->Wireless Settings on the left side menu to open the wireless setting page.
3. Select Wireless->Wireless Security on the left side menu.
4. Click Save button to save the settings.

Why is my WiFi TP-Link not working?

1) Check the WLAN LED indicator on your wireless router/modem, and make sure it is on or flashing. Check Wi-Fi On/Off button and make sure Wi-Fi is enabled. 3) Make sure your computer/device is still within the range of your router/modem. Try moving closer if you are currently too far away.

How do I setup my TP-Link router for the first time?

How do I change my WiFi settings?

1. How to Change Your Wireless Router Settings.
2. Connect to your network wirelessly, or via ethernet.
3. Find your router configuration page.
4. Log in with the username and password.
5. Find the Wireless Settings page.
6. Set the new channel, usually with a dropdown menu.
7. Your router will now reboot.
8. Troubleshooting.

How do I change my WiFi router settings?

How to Install a New Router

1. Check Your Internet Connection.
2. Place the Router.
3. Connect to Power.
4. Connect to Your Internet Source.
5. Access the Router’s Web Interface.
6. Connect Wired Devices.
7. Connect Your PC or Device to Wi-Fi.

What is tdtd-w8151n 150Mbps Wireless N ADSL2+ Modem Router?

TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router is an All-in-One device, which is designed to give you a one-stop solution to acquiring and sharing high speed Internet access over a wireless network.

What are the benefits of td-w8151n?

Complies with IEEE 802.11n standards, TD-W8151N can establish a wireless network and provide better wireless performance, transmission rates, stability and coverage.

Can I use third party firmware with TP-Link products?

TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product’s warranty.

How to avoid wireless disconnect issue during firmware upgrade?

To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device. It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.