Can I use screws on HardieSoffit?
Fasteners must be corrosion resistant, galvanized, or stainless steel. Electro-galvanized are acceptable but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails. James Hardie is not responsible for the corrosion resistance of fasteners.
Can Hardie board be used for soffit?
long, ¼ in. thick factory-primed fiber-cement panels designed to be used on the underside of eaves as soffit material. HardieSoffit panels are available as vented or non-vented boards. in of net free ventilation per lineal foot of soffit.
Is HardieSoffit good?
This material is strong AND doesn’t have the drawbacks of wood or aluminum. It’s highly resistant to water, rot, mold, impacts, and pests and doesn’t rust. It’s a wonderful material that can last for decades with little to no maintenance. James Hardie is a brand that we trust for roofing components and siding.
What can I use instead of soffit?
One great alternative to a soffit ventilation system is to install an intake vent right at the lower edge of the roof. They call this a venting drip edge. The venting drip edge seems to be the easiest and most common way to go.
Do you nail or screw Hardie board?
What is the correct fastener pattern for installing HardieBacker® cement board? Fasten HardieBacker sheets with proper nails or screws (as listed in ”Materials Required” in the backer installation instructions) every 8” around the perimeter and all supporting studs.
What is the best fastener for Hardie board?
Fasteners must be corrosion resistant, galvanized, or stainless steel. Electro-galvanized are acceptable but may exhibit premature corrosion. James Hardie recommends the use of quality, hot-dipped galvanized nails.
What widths does Hardie soffit come in?
HardieSoffit® panels are 2,438mm (8 ft) and 3,658mm (12 ft) long, 6mm (¼ in) thick factory-primed fiber-cement panels designed to be used on the underside of eaves as soffit material.
What comes first soffit or siding?
The installation of soffit will determine the positioning of the inside and outside corner posts. It also is necessary to complete the soffit before the final course of siding is installed on the wall. Soffit panels are similar to vertical siding.
What goes on first soffit or fascia?
Fascia and soffit are installed after the roof installation is finished. It is ideal that soffit and fascia materials be installed before you place tiles or any other type of roofing material on the roof. There are different types of finished and variations that can be used for the soffit.