What is the main hazard associated with using the Decarbonizer?
Causes serious eye irritation. Skin : Causes severe skin burns. Ingestion : Harmful if swallowed.
What is a Decarbonizer?
FTC Decarbonizer is a combustion enhancer that readily disperses fuel to play a catalytic role during the combustion process. FTC Decarbonizer contains Ferrous Picrate, which produces Fe++ions, which are proven to be one of the most effective for combustion.
What items should you not put in a Decarbonizer?
What can’t you put in a decarboniser? It is not recommended to put silver, silver plate, tin plate, enamel coated pots, Teflon, silicone coated pans, wood or thin plastic items into a decarboniser.
What are Carbonisers?
Decarbonisers make it easy to remove stubborn built-up grease or burnt-in food from metal utensils. Whether it’s your GN pans or canopy baffle filters which need cleaning, a commercial decarboniser is almost unmatched in its capacity and effectivenesss.
How do you Decarbonize a petrol engine?
Chemical decarbonisation One way is to add the chemical along with some fuel in a separate unit that is connected to the fuel intake line on the car. The engine is started and the car is allowed to run for 15-20 minutes or until the mixture is fully utilized. This applies to both petrol and diesel engines.
How do you use Decarboniser powder?
Immerse articles to be cleaned and soak for up to 12 hours depending on the degree of soiling. Remove and rinse thoroughly with clean water. CIP Cleaning: 2 scoops and circulate at 65°C for 15-20 minutes. Always pre-scrape, wash and rinse off any food soiling and debris before soaking.
Where is Decarboniser used?
Engine Decarbonizer are used for moving deposit of ash and carbon from the combustion chamber 4-stroke cycle engines. The system corrects smoke, power loss, heavy fuel consumption, blowby, oil dripping, hard starting; caused by glaze and/or carbon build up.
Should I Decarbonize my engine?
Most manufacturers do NOT recommend an engine decarbonization, as modern day car engines are designed to last with their components being least affected by carbon deposits. In this can you can go to any professional car care service centre and opt for fuel injector cleaning.
When should you Decarbonize an engine?
You should get your first decarbonization treatment at or around 18,000 miles (30,000 km) — but if you have gone significantly longer than this without getting the first treatment, you should avoid it altogether.
How often should you Decarbonize your engine?
Do you need to Decarbonize your engine?
What is decarbonizer and how does it work?
FTC Decarbonizer is an organo-metallic chemical substance that safely oxidizes (burns off) engine carbon deposits over time as the engine operates. When added to gasoline or diesel fuel, it modifies the chemistry of the fuel combustion process to accelerate the fuel burn and oxidize existing combustion chamber and exhaust system carbon.
What is the best decarbonizer for cylinder glaze?
FTC Decarbonizer is THE real life FIX for cylinder glaze, and carbon in combustion & exhaust spaces (including turbochargers, catalytic convertors and diesel particulate filters). You won’t need to clean or regenerate DP filters! FTC works directly at the CAUSE of the problem.
What is FTC decarbonizer?
This unique chemical product is THE real life FIX for engine-destroying cylinder glaze (which is essentially carbon packed into the cylinder bore cross hatch) and carbon in combustion and exhaust spaces. Use FTC Decarbonizer before you rebuild your engine… How Much Do I Need?
Does Bill Flannery’s decarbonizer use oil?
In the early 1990’s, Bill Flannery used the FTC Decarbonizer on this engine. As he put it, he used to top up the oil each time he used it, and check the fuel. After he ran the FTC it stopped using oil, and some 20 years later, it still doesn’t use oil and hasn’t needed overhauling.