How much does it cost to rebuild 350 Chevy heads?
$600 to $3,500 depending upon how involved you want to get with the thing. Generally, for a “good” rebuild that doesn’t really get beyond ‘mild 350’ standards, you’re looking at about $1,600-2,500 depending upon location.
How heavy are SBC heads?
SBC steel heads are about 50 pounds each.
How do I know what engine is in my Oldsmobile?
A 2-letter code on the oil filler tube identified the engine. 1968-72 V8 models have the last six digits of the VLN number, the year of the block, and the assembly plant stamped on the driver’s side of the block below the cylinder head. A 2-letter code on the oil filler tube identified the engine.
What does it cost to recondition a cylinder head?
The cost of a cracked cylinder head repair job will vary depending on the make and model of the vehicle that it’s in. You can be sure that it will cost at least $500, which includes labor and parts costs. If you were to replace the entire cylinder head, it would only cost $200 to $300 on average for parts.
How much power will Vortec heads add?
Most of these small block Chevy heads offer a power increase of around 40 hp, and even the iron Vortec heads were worth 20 hp over stock. The two best small block Chevy heads in terms of peak horsepower were worth more than 60 hp.
How much horsepower can you get out of a 350 Olds?
a typical 350 Chevy can make upwards of 350 – 375 HP before you exceed the reliability of the components. For a big block with the same stock components it can make in the area of about 400 to 475 or so HP and handle upwards of about 500 HP before you exceed the reliability of the stock cast pistons.
How much HP does a Olds 350 have?
-325 hp
350. Produced from 1968–1980, the Rocket 350 was entirely different from the other GM divisions’ 350s. It used a very oversquare 4.057 in (103.0 mm) bore and Oldsmobile small-block standard 3.385 in (86.0 mm) stroke for 350 cu in (5.7 L). Output ranged from 160-325 hp (119-242 kW).
Are there any aluminum cylinder heads for Oldsmobile 350 engines?
THIS IS THE SAME HEADS THEY HAVE FOR A BETTER PRICE .This ad is for a pair of complete assembled aluminum Oldsmobile cylinder heads for 350-403 & 400-425& 455 engines. These are cast from virgin A356 aluminum and are heat treated to T6 specs.
Are Edelbrock heads like Oldsmobile heads?
We feel that this is an affordable aluminum head for the Oldsmobile Street/Strip (Bracket Racer) and marine enthusiast. These heads are similar to the Edelbrock Oldsmobile cylinder heads, at a much reduced cost.
What kind of engine does an Oldsmobile 350 have?
They are designed for high performance, are non-emission, 1965-1976 Oldsmobile 350-403, 400, 425 and 455 c.i.d. V’8s.
How do you identify a small block engine head?
A Small Block Head At the lower left corner of the head, near the #1 or #8 spark plug hole, a number about 1.5″ high indicates a small block (a letter indicates a big block). Some have an additional letter (an A or B), about 1″ high, right next to the number (or letter). Big Block Head ID/Codes, Casting Numbers