How do you remove an OtterBox clip?
First, peel back the felt-like material enough to expose the plastic piece in the center that holds the clip on. Then pry the belt clip off with a flat bladed screw driver. The plastic piece that holds it will fall out from the inside of the cover.
How do you take off a hard phone case?
Pry the bottom corner of the case away from your phone. Pull the case down and outwards to gently move it away from your phone. Try not to bend your case at all so that you don’t damage your phone. The bottom corner is usually easier to pull off first, since it’s the furthest away from any of the side buttons.
How do you remove the belt from a OtterBox Defender?
The spinner attachment of the clip itself does not come off of the case, however, there is a pin to allow removal of the moving clip. You can use a nail or small diameter pin to tap that pin loose with a small hammer–i used a watch repair kit to do the job.
Is the OtterBox holster removable?
Yes, the belt clip is removable; the clip itself is spring-loaded, and the belt clip snaps off and on to the case.
How to open an Otterbox for the iPhone?
If you can’t get your finger under the clip,you may need to use a small flat-head screwdriver or a stiff credit card to get some leverage.
How to remove the Otterbox case from your iPhone.?
Peel the top corner of the case off the phone.
How to take off an Otter Box Case?
Remove the snap-on holster. If the device is in a belt clip or other snap-on attachment, pop it off using the large tab on the side. This will make it much easier to take the rest of the case off, so it’s best to do it right away. The process for removing a Defender Otterbox case will be the same for virtually all devices (iPhone, Android, etc.).
How do you open an Otterbox case?
– Alpha Flex screen protector instructions – Defender Series case instructions – Otter + Pop Symmetry Series case instructions – Otter + Pop Defender Series case instructions – Strada Series case instructions