What are some recording techniques?

What are some recording techniques?

Let’s start off with the simplest and most common of the five techniques:

1. A/B Stereo Recording. Mics used: Two omnidirectional mics, usually small diaphragm condensers.
2. X/Y Stereo Recording. Mics used: Two directional mics, usually small diaphragm condensers.
3. ORTF Stereo Recording.
4. Blumlein Pair.
5. Mid/Side Stereo Recording.

How do you record woodwinds?

When recording the flute, an overhead approach with a cardioid mic 6-12″ (pop) and 3-8′ (classical) away, aimed on-axis midway between the mouthpiece and the center of the instrument should yield a nice blend of breathy character and body tone. Again, listen for distracting mechanical and exaggerated breath noises.

Where is the best place to mic a flute?

HOW TO MIC A FLUTE OR RECORDER

• Approx. 5-10 cm away from the instrument, aim the mic halfway between the mouthpiece and the left hand.
• Due to its polar character, the flute can also be spot-miked behind and slightly above the head of the player, pointing at the finger holes.

How do you record an orchestra?

Introduction to Recording Orchestra Engineers use a wide variety of techniques when recording orchestras or small ensembles, from simply placing one stereo microphone just above and behind the conductor’s head to using several spot mics for each instrument section in conjunction with one to several ambient microphones.

How do you mic a bassoon?

Close- or spot-miking a bassoon is very similar to that of the soprano saxophone, clarinet and oboe: Aim the mic at the fingering holes, a third of the length up from the bell, at a distance of 15-20 cm. Use a 4006A Omnidirectional Microphone or a 4006C Omnidirectional Microphone, Compact when possible.

What type of microphone is best for flute?

10 Best Flute Microphones Reviewed

1. Sennheiser MD 441. Sennheiser MD 441-U versatile dynamic super-cardioid pattern microphone a five-position.
2. SM57 Flute Shute. Shure SM-57 Cardioid Dynamic Instrument Microphone.
3. Audix ADX 10-FLP.
4. AEA R88MK2.
5. Sennheiser MKH 40.
6. Neumann U87.
7. AKG C414.
8. Neumann TLM103.

How do you mic a live orchestra?

The mic is typically placed two feet above the heads of the musicians and carefully positioned to avoid being struck by a bow during performance. “This position produces a warm sound that’s somewhat direct without a lot of upper-midrange screech that needs to be EQ’d out,” offers Colby.

What is a bassoon?

The bassoon is a woodwind instrument in the double reed family that plays music written in the bass and tenor clefs, and occasionally the treble. You’ll see Bassoons in orchestras, concert band, and chamber music literature. If you have one and want to record it or play it try some of these Mic Placement Techniques.

Why is it so hard to MIC a bassoon?

The odd shape of the Bassoon with large body and upward turned Bell make the miking o this instrument somewhat difficult. The bassoon is a woodwind instrument in the double reed family that plays music written in the bass and tenor clefs, and occasionally the treble. You’ll see Bassoons in orchestras, concert band, and chamber music literature.

How do you make a bassoon sound?

Sound is produced by sealing the lips around the double reed made of cane and blowing air against and through the two blades causing them to vibrate against each other at a certain frequency or pitch. The bassoon, which is pitched in C, has slightly more than a three-octave range starting from the Bb below the bass staff up to the treble E.

Where can I buy bassoon reeds?

Finally, you can purchase finished Bassoon Reeds. Beginners, you should start here and either purchase reeds from your bassoon teacher or from a supplier that he or she recommends to you. Beginners have enough to work on at first that reed making at this stage would be too burdensome.