Is render fireproof?
Fireproof Render For Rendering Brick, Stone, Concrete & Breeze Block Fireplaces. Fireplace Render is used as a base coat for the Vitcas Heat Resistant Plaster finish coat. Resistant up to a maximum temperature of 1400oC / 2552oF.
What is fireplace render?
Rendering a fireplace basically involves spreading a layer of mortar (sand cement) over the brickwork. The rear of the fireplace is stone and was tidied up (pointed) to achieve a rather nice look.
How do you render fireproof?
Use 10 parts sand, three parts cement and fireclay, and one and a half parts lime. Wear a dust mask while you measure the powders as they are very dusty, which can be damaging to the lungs.
How do I use Vitcas fire cement?
Premium Fire Cement should be used straight from tub. Apply with a trowel, knife or hand and work well into the area. Fine joints can be made. As soon as possible, gently heat dry the repaired surfaces, gradually raising the heat to full operating temperature over 3-4 hours.
How do you make cement fireproof?
Portion the materials into a 3:2:2:0.5 ratio so you have 3 parts gravel, 2 parts sand, 2 parts refractory cement and 0.5 parts of the hydrated lime. Follow this ratio regardless of the volume of fireproof concrete you will be making.
What is the best mix for rendering?
A common mix ratio used for rendering is 6 parts sand, 1 part cement and 1 part lime. Any general purpose cement can be used, although the sand should be fine and clean of impurities. Coarser sand is usually used as the base layer and slightly finer sand for the top layer.
Is acrylic render fireproof?
It is a polymer-modified cement render that has been specifically formulated to be heat-resistant.
Is cement good for fire pit?
Concrete is made up entirely of non-combustible materials, this lack of flammability makes it the perfect base for a fire pit. What concrete will do is expand when exposed to high temperatures, this could potentially cause cracking.
Can concrete be used for a fireplace?
Concrete is one of the best materials to use for a fireplace surround. It is very durable, attractive and nonflammable. The design flexibility is virtually unlimited because it is poured into a handmade mold, which can be any shape you desire.
How long does Vitcas fire cement take to dry?
around 12 hours
The general curing time for the fire cement is around 12 hours. It depends on a brand to brand, but the generally accepted curing time is 12 hours from the initial application around the cracks. Once you have applied the cement, let the water cookout, then turn on the heat for 4 to six hours.
Does fire cement smell?
After the fire gets the stove up to temp the smell pretty much goes away. This smells nothing like curing stove paint, the paint is totally cured.
Can concrete be used for fire pit?
What is vitcas fireplace render?
Item was successfully added to your Cart! Vitcas Fireplace Render is a dry powder material which is formulated to protect brick and masonry surfaces from the heat. With a maximum temperature of 1400 o C (2552 o F), it is more than adequate for these and other applications.
How long does it take for vitcas render to dry?
The Vitcas ® Fireplace Render should be left to dry for at least 3 days in temperatures above +20°C and for longer if moisture is still present as apparent by the colour of the material. If possible apply heat after day one ie light the fire or use another type of heater.
What is a vitcas?
Vitcas is a manufacturer of refractories, heat resistant products and high temperature insulation materials which follows the tradition of refractory and heat resistant manufacturing in Bristol, UK, since 1882. Our products include fire cement, fire bricks, refractory setting cements/mortars, plastic mouldables refractories, zircon refractory
What is fireproof render used for?
Fireproof Render For Rendering Brick, Stone, Concrete & Breeze Block Fireplaces. Fireplace Render is used as a base coat for the Vitcas Heat Resistant Plaster finish coat. Resistant up to a maximum temperature of 1400 o C / 2552 o F.