How do I configure WAN settings?

How do I configure WAN settings?

In WAN settings, you can choose from one of the WAN types below and configure their respective settings: DHCP. Static IP. PPPoE credentials….How do I edit WAN settings?

  1. Open the Google Home app .
  2. Tap Wi-Fi Settings. Advanced Networking.
  3. Tap WAN.
  4. Choose DHCP, Static, or PPPoE.
  5. Make any changes, then tap Save .

Is CenturyLink PPPoE or Pppoa?

CenturyLink circuits are usually set to auto connect with either PPPOE or PPPOA, so either of these protocols will work. In CenturyLink territory you will be assigned a username and password. The username will be whatever your chosen login here is with ‘@dsl.eskimo.net’ after it.

What is CenturyLink WAN?

WAN settings allow you to change the protocol and addressing type required by CenturyLink for internet access. Do not change these settings unless instructed by a CenturyLink technician. NOTE: Depending on your model, your modem’s user interface may appear slightly different from the images below.

What is my WAN connection type?

Click Windows Start > Control Panel. Click the Network and Internet Connections icon. Click the Network Connections icon. Right-click the icon that represents your network connection and select Properties.

How do I fix my WAN connection?

How to Fix WAN Connection Down?

  1. Restart the Router. The first thing you should do is restart the router to see whether the WAN port works.
  2. Boost Security.
  3. Upgrade Modem.
  4. Troubleshoot Network Adapter.
  5. Get a Technician.

Does CenturyLink use DHCP?

Dynamic Host Configuration Protocol (DHCP) settings allow you to set the parameters for how your modem assigns IP addresses to devices on your network. Proceed with caution! CenturyLink recommends that you keep the default settings for the LAN IP address. DHCP Server: Enable.

How do I get a CenturyLink PPPoE?

Your PPP username can be found by selecting the modem status tab. The connection status page includes the PPP username. The PPP password can only be obtained by calling CenturyLink.

Should my WAN light be on?

This light is often labeled as Internet, WAN, or marked with a symbol of globe or a satellite flying around a globe. In most cases, this light needs to be lit solid (white, green or amber) or flashing to show that internet activity is happening.

What does WAN light mean on modem?

WAN Light. WAN (Wide Area Network) will be lit when you have a good connection with the exchange or node. This will indicate that the internet is flowing from the outside world and into your modem.

Should I disable WAN?

No, you should not. The only time you would need it enabled would be if if you are having network problems and want to troubleshoot your Router or Modem.

How do I reset my router WAN?

There is an option in HOME andWAN, called Auto Reconnect. Enable it, and the router will force renew a WAN IP addressregulary. Apply and restart.

What is a LAN Subnet on a CenturyLink modem?

LAN Subnets: Your modem can support multiple LAN subnet settings. Use the DHCP Settings page to configure the default IPv4 subnet. CBRAS configuration: CBRAS is a specialized CenturyLink remote access server that allows multiple sources of internet traffic (cable, DSL or broadband wireless) to converge in a single network.

How do I change the Wan settings on my modem?

Select “WAN Settings” in the left sidebar. This menu option may appear beneath the WAN Settings section, or the IP Addressing section, depending on your modem model. A PPP connection is used by some providers to deliver your internet.

How do I configure the default IPv4 subnet for CenturyLink?

Use the DHCP Settings page to configure the default IPv4 subnet. CBRAS configuration: CBRAS is a specialized CenturyLink remote access server that allows multiple sources of internet traffic (cable, DSL or broadband wireless) to converge in a single network. QoS : Prioritizes traffic types (such as VoIP) before standard data traffic.

What are the advanced setup settings on a modem?

The Advanced Setup area of your modem’s user interface lets you change several settings that give you greater control over your modem’s operation. These settings are best for tech-savvy folks who understand a bit more than the typical user about modems and networking. 1.