Can I use TV speakers for my computer?

Can I use TV speakers for my computer?

Most HDTVs have RCA audio-out jacks, and a simple adapter cable will let you plug in your PC speakers. Just make sure your TV’s USB port can supply power, as not all can; there’s often no way to know without trying the speakers. That said, you might as well opt for speakers with a bit of size and oomph.

Can you use HDMI for speakers?

Yes there are. HDMI is mainly a video interface but it carries audio as well and you can extract the audio without decoding the video.

Can you use HDMI as audio output?

Setting the HDMI audio signal output of connected devices (HDMI Audio Out) You can set the HDMI audio signal output of playback devices connected to the receiver via an HDMI connection. Select [Settings] – [HDMI Settings] from the home menu. Select [HDMI Audio Out].

How do I connect my computer to my TV with sound?

Connect your computer to the TV with a male-to-male audio cable. This is a 3.5mm stereo audio cable, similar to the end of a headphone plug. Plug one end of the cable into the headphone jack on your computer, which is typically a green port. Then plug the other end into the audio-in port on the TV.

How do I connect computer speakers to my TV with sound?

How to Connect Computer Audio to a TV

1. Purchase an audio plug.
2. Plug the single black end of the audio cable into the computer output port you would normally plug your computer’s speakers into.
3. Turn your TV on and change the input on your TV to match the port you’ve plugged your cables into.

Can you use HDMI for sound on PC?

Go to your Windows Control Panel and then open sound properties. You will find a list of audio outputs available. Select the HDMI output and right-click to open a menu. Then right-click the HDMI output and make sure it is enabled.

How do I connect my wired speakers to my TV?

How To Connect Speakers To TV With Speaker Wire

1. At the rear of your TV or cable box, find the color-coded audio output jacks.
2. Plug the red RCA audio cable into your TV’s red RCA audio jack and plug the white RCA audio cable into your white RCA audio jack.
3. Switch on your TV and, one by one, check each speaker.

How to fix HDMI no sound in Windows 10 when connected to TV?

So, continue reading to learn how. There is a wide range of reasons behind the ‘HDMI No Sound in Windows 10 When Connected to TV’ issue. 1. It starts with the HDMI cable you use to connect to the computer, TV, or monitor. Plug the HDMI cable into another PC/TV and check whether you can hear any sound.

How to connect PC speakers to a TV?

Bluetooth: newer TVs may have Bluetooth transmitters built right in, and this may allow you to connect to your new PC speakers wirelessly. This is the easiest and simplest way to connect PC speakers to your flat screen or any other television. All you need are:

Can you connect speakers to a TV without an HDMI out?

For TVs with only an HDMI output jack, it’s still possible to connect an external set of speakers or amp. In that case, you’ll need an HDMI audio extractor that provides RCA output jacks.

How to connect a mini amp to a TV?

As shown in the diagram, you’ll need to connect the amplifier to the TV’s audio outputs using RCA cable or in some cases, and 3.5mm adapter also. Most mini amps come with an AC-DC wall power supply you’ll plug in. Next, you’ll connect the amp to the speaker terminals using speaker wire and you’re ready. 3.